Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /home/logoscr9/public_html/teleadvice.com/_includes/dbconn.php on line 9
TeleAdvice, Inc. -
 
| | |
TeleAdvice
TeleAdvice Home Page
Services Company Information Policies Information Library
   
 
 
 
 

Information Library Article
DST - Programming Northern Phones

Date: January 1, 2001

Abstract: Step-by-step procedures for setting date and time on Northern phone systems

Northern Systems

The ICS systems can be programmed to automatically switch between standard time and daylight saving time.

NORSTAR DR5:

From any two-line display set (M7310, M7324, T7316):

  1. Press FEATURE
  2. Press **266344
  3. Enter password 266344
  4. Display will read A. Configuration
  5. Press NEXT (display: B. General admin)
  6. Press SHOW
  7. Press NEXT twice (display: Time and date)
  8. Press SHOW
  9. Press CHANGE soft key
  10. Press CHANGE soft key again to change
  11. Enter the two-digit hour in 24 hour format
  12. Press NEXT
  13. Press CHANGE soft key if minutes need to be changed
  14. Continue by pressing NEXT to change date
  15. Press RLS to end session and save

NORSTAR MICS/CICS:

From any two-line display set (M7310, M7324, T7316):

  1. Press FEATURE
  2. Press **8463 (Spells TIME)
  3. Enter password 22742 (or higher level)
  4. Display will read Hour, Next, Change
  5. Press CHANGE soft key
  6. Enter the two-digit hour in 24 hour format
  7. If time is before 13, press CHANGE to toggle between AM or PM
  8. Press OK
  9. Press NEXT display will MINUTES (change if necessary)
  10. Press RLS to end session and save

Automatic Daylight Saving Time Programming:

From any two-line display set (M7310, M7324, T7316):

  1. Press FEATURE
  2. Press **266344
  3. Enter password 266344
  4. Depress NEXT six times (display: System prgming)
  5. Press SHOW
  6. Press NEXT three times (display: Featr settings)
  7. Press SHOW
  8. Press NEXT fifteen times (display: Daylight time)
  9. Press CHANGE soft key to select setting of Y
  10. Press RLS to end session and save


Disclaimer: This information is provided for informational use only. It is not a substitute for consulting advice or individual analysis of a particular consulting matter. Transmission and receipt of this information does not create a consultant-client relationship. Readers should not act without proper training or without seeking the assistance of their vendor(s). The user assumes all responsibilities associated with changing settings in their systems and agrees to indemnify TeleAdvice Incorporated for actions taken by the user in accordance to the Indemnification policies of TeleAdvice Incorporated. Any dissemination or duplication of the information contained on this web site is strictly prohibited.

1266 West Paces Ferry Road #314 | Atlanta, Georgia 30327
Ph: 404-220-0000 | Fax: 404-994-2663